With this Metal-compatible graphics card installed, you will not be able to see the Apple logo at boot, nor can you access boot. I mean any video card like the GeForce GTX 260 as well. Also, Apple said they dont have a list of supported video cards, but the system should support any PCI-."Available", "supported", and "will work" are three very different things.Make Offer - Apple Mac Pro CUDA Graphics NVIDIA Quadro 4000 2 GB GDDR5 Graphics Video Card Mac Pro 5,1 Sapphire AMD Radeon Toxic R9 280X 3GB GDDR5 PCI E Graphics VID Card 180.00. Mac Pro 2009 2010 GeForce GT120 512MB Graphic Card A1310 639-0376 630-9643 5.0 out of 5 stars 1 XFX Radeon RX 580 GTS XXX Edition 1386MHz OC+, 8GB GDDR5, VR Ready, Dual BIOS, 3xDP HDMI DVI, AMD Graphics Card (RX.Apple no longer sells any of these cards, except the Quadro FX family (which is super-expensive and not consumer-oriented). I believe most, if not all, of the above officially supported cards are all Apple-specific variants. There are various non-Apple versions of the above, which may or may not work in a Mac Pro, depending on firmware compatibility (sometimes it is possible to program a Mac-compatible version of the firmware into a non-Apple card's non-volatile flash, thus enabling the use of a non-Apple version in the Mac Pro). But the bottom line is that it is not really possible to purchase these cards anymore (except for the super-expensive Quadro FX and maybe a small quantity of the others that can be found used on Amazon or eBay).That said, there is at least one other card that is currently (as of Summer 2011) available that will work in an original Mac Pro.
For instance, the instructions mention sliding a PCI cage (to move a retention bracket), but the bracket is not present, and the cage doesn't move in the original Mac Pro (each PCI slot has it's own small retention "clip" instead). Also, the power connector on the motherboard is in a different location in the original Mac Pro.If you do some research, you will find various other reports of users having success with other cards (especially various ATI Radeon variants). Oftentimes, it involves updating the firmware (flashing). Favoriteborder.These are the only cards that are supported in an original Mac Pro. Video Cards Pro Drivers To InstallFinal Cut Pro works admirably as a software-based, nonlinear editor, but adding hardware to the mix can expand its capabilities. I too purchased one from a local Apple Store and installed it in my original Mac Pro (running OS X 10.6.7), so I can state for a fact that this card does work just fine, and it doesn't require any hacking (no drivers to install, no firmware to be flashed) - it just works right out of the box. It also performs quite a bit better than the older officially compatible cards. The ContendersOf the four capture cards we tested, there are two types: standard cards and breakout box (BOB) cards. The cards performed as promised, so their individual features are what set them apart. But be aware that you’ll need peripheral equipment to support them: an Ultra-SCSI RAID is a must for the data rate these cards produce, and to control your videotape deck, you’ll also need an RS-422 serial port.Our test systems were an 867MHz Power Mac G4 and a dual-1GHz Power Mac G4, each with 1GB of RAM, an Ultra-160 SCSI RAID, an ATA-133 hardware RAID (for comparison), and a digital beta video source. Choosing the right card can be daunting, though, since there is more to consider than just image quality.Final Cut Pro supports four capture cards: AJA Video Systems’ Kona SD, Aurora Video Systems’ IgniterRT, Digital Voodoo’s D1 64AV, and Pinnacle Systems’ CineWave Classic. ![]() The IgniterRT can handle Final Cut Pro 3’s (4.0 mice. (AJA says more RT effects will be added in future free software upgrades.)Both the IgniterRT and the D1 64AV are single-stream cards and have fewer RT effects. The only other card with dual-stream capabilities is the Kona SD, whose accompanying software currently offers 11 dissolve and color effects. However, to unlock any of its powerful effects, you’ll need to part with $2,495 for Pinnacle’s RT software upgrade. You can even add keyframeable RT effects and filters — such as color balance, tint, opacity, and scale — to these simultaneous streams. With its dual-stream system, the CineWave Classic can play back either two streams of video and one graphics track with an alpha channel, or one video stream with two graphics layers. ![]() But when it comes to standard cards, AJA Video Systems’ Kona SD has a slight edge over Digital Voodoo’s D1 64AV. Pinnacle stated that OS X drivers would be ready by the time you read this Aurora said that an OS X driver is still months away.No professional capture card does it all. At press time, both the CineWave Classic and IgniterRT worked only in OS 9. Best tool for wireframing on a macTwo of these cards — the Kona SD and the D1 64AV — capture video at 10-bit quality, which is technically superior to the 8-bit quality allowed by the IgniterRT, though either is sufficient for impressive results. This may also be the card for you if you’re a pro looking toward high definition.Image quality is the primary reason for choosing to work with uncompressed video. If timesaving techniques are paramount, Pinnacle Systems’ CineWave Classic is ruler of the RT world. But for standard video, it’s difficult, if not impossible, to see the difference between 10-bit and 8-bit (and most video formats are 8-bit).
0 Comments
Leave a Reply. |
AuthorAmanda ArchivesCategories |